H3C S5600 Series Operation Manual page 19

Figure 1-3 Connection description
3) Then, the Connect To window as shown in
use from the Connect using drop-down list, and then click OK.
Figure 1-4 Specify the serial port used to establish the connection
4) The COM1 Properties window as shown in
second to 9600, Data bits to 8, Parity to None, Stop bits to 1, and Flow control to None. Click
OK.
Figure 1-4 appears. Select the serial port you want to
Figure 1-5 appears. On the window, set Bits per
1-3