H3C S5600 Series Operation Manual page 116

Network diagram
Figure 2-2 Network diagram for protocol-based VLAN configuration
IP Server
GE1/0/11
GE1/0/10
IP Host
Workroom
Configuration procedure
# Create VLAN 100 and VLAN 200, and add GigabitEthernet 1/0/11 and GigabitEthernet 1/0/12 to
VLAN 100 and VLAN 200 respectively.
<Switch> system-view
[Switch] vlan 100
[Switch-vlan100] port GigabitEthernet 1/0/11
[Switch-vlan100] quit
[Switch] vlan 200
[Switch-vlan200] port GigabitEthernet 1/0/12
# Configure protocol templates for VLAN 200 and VLAN 100, matching AppleTalk protocol and IP
protocol respectively.
[Switch-vlan200] protocol-vlan at
[Switch-vlan200] quit
[Switch] vlan 100
[Switch-vlan100] protocol-vlan ip
# To ensure the normal operation of IP network, you need to configure a user-defined protocol template
for VLAN 100 to match the ARP protocol (assume Ethernet II encapsulation is adopted here).
[Switch-vlan100] protocol-vlan mode ethernetii etype 0806
# Display the created protocol-based VLANs and the protocol templates.
[Switch-vlan100] display protocol-vlan vlan all
VLAN ID: 100
VLAN Type: Protocol-based VLAN
Protocol Index
0
1
VLAN ID: 200
VLAN Type: Protocol-based VLAN
Protocol Index
0
AppleTalk Server
GE1/0/12
AppleTalk Host
Protocol Type
ip
ethernetii etype 0x0806
Protocol Type
at
2-10