Telnet Configuration With Authentication Mode Being Password; Configuration Procedure - H3C S5600 Series Operation Manual

[Sysname] user-interface vty 0
# Configure not to authenticate Telnet users logging in to VTY 0.
[Sysname-ui-vty0] authentication-mode none
# Specify commands of level 2 are available to users logging in to VTY 0.
[Sysname-ui-vty0] user privilege level 2
# Configure Telnet protocol is supported.
[Sysname-ui-vty0] protocol inbound telnet
# Set the maximum number of lines the screen can contain to 30.
[Sysname-ui-vty0] screen-length 30
# Set the maximum number of commands the history command buffer can store to 20.
[Sysname-ui-vty0] history-command max-size 20
# Set the timeout time to 6 minutes.
[Sysname-ui-vty0] idle-timeout 6

Telnet Configuration with Authentication Mode Being Password

Configuration Procedure

Follow these steps to configure Telnet with the authentication mode being password:
To do...
Enter system view
Enter one or more VTY user
interface views
Configure to authenticate
users logging in to VTY user
interfaces using the local
password
Set the local password
Configure the command level
available to users logging in
to the user interface
Configure the protocol to be
supported by the user
interface
Set the commands to be
executed automatically after a
user login to the user
interface successfully
Make terminal services
available
Set the maximum number of
lines the screen can contain
Use the command...
system-view
user-interface vty first-number
[ last-number ]
authentication-mode
password
set authentication password
{ cipher | simple } password
user privilege level level
protocol inbound { all | ssh |
telnet }
auto-execute command text
shell
screen-length screen-length
3-5
Remarks
—
—
Required
Required
Optional
By default, commands of level 0 are
available to users logging in to VTY user
interface.
Optional
By default, both Telnet protocol and SSH
protocol are supported.
Optional
By default, no command is executed
automatically after a user logs into the
user interface.
Optional
By default, terminal services are available
in all user interfaces.
Optional
By default, the screen can contain up to
24 lines.
You can use the screen-length 0
command to disable the function to
display information in pages.