Provisioning; Overview; Auto Provisioning - Grandstream Networks UCM6108 User Manual

http://arttel.ru

OVERVIEW

Grandstream SIP Devices can be configured via Web interface as well as via configuration file through
TFTP/HTTP/HTTPS download. All Grandstream SIP devices support a proprietary binary format
configuration file and XML format configuration file. The UCM6100 provides a Plug and Play mechanism to
auto-provision the Grandstream SIP devices in a zero configuration manner by generating XML config file
and having the phone to download it. This allows users to finish the installation with ease and start using the
SIP devices in a managed way.
To provision a phone, three steps are involved, i.e., discovery, assignment and provisioning. The UCM6100
creates XML config file to the detected/assigned Grandstream device and accomplishes the following
configurations on the device after the provisioning:
A UCM6100 extension will be assigned and registered on the phone.
x
SIP-related network settings such as "NAT traversal" and "Use Random Port" are configured on the
x
phone.
Call settings such as "Dial Plan" and "Auto Answer".
x
LDAP client configurations will be set up automatically on the phone to use the default LDAP directory
x
generated in the UCM6100 LDAP server.
This section explains how zero config works on the UCM6100. The settings for this feature can be accessed
via Web GUI->PBX->Basic/Call Routes->Zero Config.

AUTO PROVISIONING

By default, the Zero Config feature is disabled on the UCM6100 for auto provisioning. It can be turned on in
"Auto Provision Settings" under Web GUI->PBX->Basic/Call Routes->Zero Config. Three methods of
auto provisioning are used.
Firmware Version 1.0.2.21
http://arttel.ru/shop/ip-atc/ip-ats-grandstream-ucm6102

PROVISIONING

UCM6100 Series IP PBX User Manual Page 47 of 159