Error Requiring Restart - MUTOH VJ-1938TX Operation Manual

Error requiring restart

An error requiring restart is displayed if a fatal operational failure such as the following occurs.
• When an obstacle that prevents printing occurs.
• When a problem occurs with the electrical circuit (PCB, motor, sensor, etc.) of the printer.
• When a failure in the printer control program occurs.
If an error requiring restart occurs, the printer stops operating after performing the following operations.
1. The drive power automatically shuts down.
2. All lamps on the operation panel blink, and the buzzer rings continuously.
3. The error message is displayed on the operation panel.
Pressing any key on the operation panel stops the beeping.
For an error requiring restart, operation will return to normal after removing the cause of the error and restarting the printer.
If the same error continues to be displayed, contact the your local MUTOH dealer.
Be sure to tell us the code no. of the error message when you contact us.
E***Err [ ]
Note
• "***" in the error message is the code no. that indicates what type of error occurred.
• The command code representing the error occurred may be indicated in [ ].
142

Error requiring restart

Display
A problem that does not have a remedy has occurred.
1. Remove obstacles such as paper scraps in the drive system.
2. Confirm that the replaced items are correctly attached.
3. Turn the power button off. Wait a short while, then turn the power
button on, to restart the printer.
Description