Error Requiring Restart - MUTOH ValueJet 1608 HS User Manual

7.2.5

Error requiring restart

This section describes errors requiring restart and remedies.
An error requiring restart is displayed if a fatal operational failure such as the following occurs.



If an error requiring restart occurs, the printer stops operating after performing the following
operations.
Step 1:
Step 2:
Step 3:
Pressing any key on the operation panel stops the beeping.
For an error requiring restart, operation will return to normal after removing the cause of the
error and restarting the printer.
If the same error continues to be displayed, contact the your local Mutoh dealer.
Be sure to tell us the code no. of the error message when you contact us.
1
Note
AP-75810 - Revision 2.0
Downloaded From ManualsPrinter.com Manuals
When an obstacle that prevents printing occurs
When a problem occurs with the electrical circuit (PCB, motor, sensor, etc.) of the printer
When a failure in the printer control program occurs
The drive power automatically shuts down.
All lamps on the operation panel blink, and the buzzer rings continuously.
The operation panel displays the error message.
N° Display
E** Error [ ]
"***" in the error message is the code no. that indicates what type of error

occurred.
The command code representing the error occurred may be indicated in [ ].

For the settings on your PC side, refer to the Operating Manual attached with

your PC.
Description
1. Remove obstacles
such as paper scraps.
2. Confirm that the
Error requiring a replaced items are
restart correctly attached.
3. Switch OFF the
printer and switch it
back ON after 10
seconds.
User's Guide ValueJet 1608 HS
Remedy Reference
The media is
jammed on
page 178
7
177