Oki OKIFAX4550 Maintenance Manual page 77

T.F.
Item
No.
06 TAD mode
(For external telephone
answering device.)
07 Real time dialing
08 TEL/FAX switching
41309401TH Rev.4
Table 2.2 (2/8) Service Personnel Initial Settings
Switches an automatic voice message response
to the calling station.
TAD mode is of three types (TYPE1/TYPE2/
TYPE3).
OFF/TYPE1/TYPE2/TYPE3 selectable.
TYPE1 means:
1. RING comes.
2. The TAD answers, returns the recorded voice
message in TAD to calling party.
3. The FAX machine will continue to detect CNG
signal while TAD works.
4. If the FAX machine detects CNG signal, the
fax will go into normal receiving mode.
5. Even though the fax does not detect CNG
signal, the fax will go to receiving mode in
hook-on condition.
TYPE2 means:
The operations of No. 1 to No. 4 are the same as
those of TYPE 1.
5. If the fax does not detect CNG signal during
working of TAD, the machine will go to standby
mode.
TYPE3 means:
The operations of No. 1 to No. 2 are the same as
those of TYPE 1.
3. The fax does not detect CNG signal during 15
seconds from TAD operation starting.
4. The fax starts CNG detection after 15 sec-
onds from TAD operation. If the CNG is
detected, the fax goes to the normal receive
mode.
5. If the fax does not detect the CNG during TAD
operation, the fax goes to standby mode.
Enables or disables the real time dialling.
3 types selectable. (OFF/TYPE1/TYPE2)
TYPE1:
TYPE2:
Enables or disables the TEL/FAX automatic
switching.
ON :
OFF : Disable
(Related item: FP10, TF23)
Specifications
Real-time dialling is available when
the telephone handset is OFF-HOOK.
Real-time dialling is available when
the telephone handset is OFF-HOOK
or HOOK key is pressed.
Enable
Default
77 /