Oki OKIFAX4550 Maintenance Manual page 110

Table 2.7 (3/6) User's Initial Settings (One-touch key Program)
F+OT
Item
No.
8 Location program
1. One-touch key
2. Two-digit or max. three-digit
auto dial program
3. Group setting
9 User's programs
1. Function program
41309401TH Rev.4
Specifications
One-touch keys allow registering:
(1) Telephone number (numeral, -, P and space) in 32 digits
for OKIFAX4550 and 40 digits for OKIOFFICE87.
(2) Alternate fax telephone number in 32 digits for
OKIFAX4550 and 40 digits for OKIOFFICE87.
(additional registration)
(3) ID for the telephone directory function in 15 characters
(alphabetic, numeric and symbolic).
(4) 10 one-touch keys are provided.
Auto-dial No. 01 to 70 for OKIFAX4550, No. 01 to 99, 100 for
OKIOFFICE87 allows registering telephone number in 32
digits (numeral, -, P and space) for OKIFAX4550 and 40
digits for OKIOFFICE87 and ID for the telephone directory
maximum 15 characters (alphabetic, numeric and symbolic).
Grouping some one-touch keys and some two-digit auto dial
codes to which telephone numbers have been assigned.
Five group programming are available.
The group programming makes multiple polling reception
and broadcast operation simple.
01: MCF (SINGLE-LOC.)
02: MCF (MULTI-LOC.)
03: ERR. REPORT (MCF.)
04: IMAGE IN MCF.
05: SENDER ID
06: MONITOR VOLUME
07: BUZZER VOLUME
08: CLOSED NETWORK
09: TX MODE DEFAULT
10: T/F TIMER PRG.
11: RING RESPONSE
12: DISTINCTIVE RING
13: PAPER SIZE
14: USER LANGUAGE
15: INCOMING RING
16: REMOTE RECEIVE
17: MEM./FEEDER SW.
18: POWER SAVE MODE
19: ECM FUNCTION
20: REMOTE DIAGNOSIS
21: PC/FAX SWITCH
22: NO TONER MEM RX
23: MEM FULL SAVE
24: CONTINUOUS TONE
25: INSTANT DIALING
26: RESTRICTED ACCESS
27: WIDTH REDUCTION
28: TONER SAVE
29: CNG COUNT
30: ISDN DIAL MODE
31: SPEECH RECEIVE
32: USB CONV. MODE
33: PAPER SIZE CHECK
34: PRINT JOB T.O.
Refer to Table 2.7 for specification of the function programs
No. 01 through 34.
110 /