Oki OKIFAX4550 Maintenance Manual page 113

Table 2.7 (5/6) User's Initial Settings (One-touch key Program)
F+OT
Item
No.
11. ISDN programming
10 Printer cleaning
41309401TH Rev.4
Specifications
Sets to Country code, ISDN No. (subscriber number), ISDN
ID (subscriber code) and ISDN sub address.
1) Setting values
This setting consists of the following:
• Country code: 3 characters (digits only)
• ISDN No. (subscriber number): 20 characters (digits
only)
• ISDN ID (subscriber code): 10 characters (alphabetic
characters, lowercase characters)
Handling in G3 mode
Handling in G4 mode
Not used
Switching in standard procedure. User for location display.
Used for TSI/CIL printing. ISDN No.used for collating closed
area communication.
In case of origination, the ISDN number if used for reporting
the calling subscriber number, it is reported to the network.
In case of termination, the ISDN number is used for MSN
collation.
• ISDN sub address: 19 characters (digits only)
Handling in G3 mode
Handling in G4 mode
Used for sub collation.
Note 1: This setting can be made when G4 option is mounted.
2: The setting data must be transferred to the G4
board.
This drum cleaning function removes the residual toner on
the I/D (image drum) Unit surface by printing.
113 /