Oki OKIFAX4550 Maintenance Manual page 138

No. Item
Dial parameters
01 Redial tries
02 Redial interval
03 Dial tone detect
04 Busy tone detect
05 MF (TONE) or DP (Pulse)
06 Pulse dial rate
07 Pulse make ratio
08 Pulse dial type
09 MF (Tone) duration
10 PBX line
11 Flash/Earth/Normal
12 Auto start
13 Access digit
41309401TH Rev.4
Table 2.13 Dial Parameters Settings
Switches on the re-dial times to meet the regulations of
the installed country. 0 to 10 tries (in one-try steps)
1 to 5 tries for FRE.
Switches on the re-dial intervals to meet the regulations of
installed country. 1 to 6 minutes (in one-minute steps)
1 to 12 minutes for FRE.
Selects the dial tone detection.
ON/OFF selectable.
ON:
OFF:
Selects the busy tone detection.
ON/OFF selectable.
ON:
OFF:
Selects dialling by multi-frequency or dial pulse.
Selects the dialling pulse rates for the line.
10 pps/16 pps/20 pps selectable.
Selects pulse dial rate.
33%/39%/40%
Selects pulse dial type.
Normal(N)/10-N/N+1
Selects MF (Tone) duration.
75/85/100 ms selectable.
Selects PBX line.
ON/OFF selectable.
ON:
OFF:
Selects the PBX type to meet the exchange requirements.
NORMAL/EARTH/FLASH selectable.
(PBX line origination types)
Enables or disables the function of dialing without pressing
the START key in one-touch dial and 2-digit auto dial
modes.
ON:
OFF:
Prefix dialing digits with which PBX connects the fax to the
public line.
OFF/max. 4digit(s) selectable.
Digit:
OFF:
Specifications
Enable
Disable
Enable
Disable
GER, SUI, AUT = 40%
PBX line
PSTN
Enable
Disable
Enable
Disable
138 /