Oki OKIFAX4550 Maintenance Manual page 33

Configuration
Print conditions
1) Setting by user
Two pages shall be printed out. Setting only is printed on the first page and Dial Parameter
setting, SYSTEM DATA PRG. and Fax2Net/ISDN registration.are printed on the second
page.
2) Setting by service persons
Printed as the third page when Service Bit = ON.
<First page>
3) 06: MONITOR VOLUME
"OFF," "LOW," "MIDDLE," "HIGH-MID," and "HIGH" are printed.
4) 13: PAPER SIZE
"A4", "LETTER", "LGL13", "LGL14", "A5", "A6", "JIS-B5"
5) 28: TONER SAVE
"ON," and "OFF" are printed.
6) 29: CNG COUNT
"1" - "5" are printed.
7) 30: ISDN DIAL MODE
"G4," and "G3" are printed. Left blank when no ISDN board is mounted.
8) 31: SPEECH RECEIVE
"ON," and "OFF" are printed. Left blank when no ISDN board is mounted.
9) 32: USB CONV. MODE
"ON," and "OFF" are printed. Left blank for OKIFAX4550.
10) 33: PAPER SIZE CHECK
"ON," and "OFF" are printed. Left blank for OKIFAX4550. Left blank for OKIOFFICE87 when
32:USB CONV.MODE is OFF.
11) 34: PRINT JOB T.O.
"5SEC," " 30SEC," and "5MIN" are printed. Left blank for OKIFAX4550. Left blank for
OKIOFFICE87 when 32:USB CONV.MODE is OFF.
12) Left blank when an ISDN board is mounted or Service Bit = OFF at settings Nos.10, 11, 12,
15, 16, and 29.
13) Left blank when MFP has no option at setting No.21.
<Second page>
14) DIAL PARAMETER: All parameters are printed when Service Bit = ON.
Some parameters are left blank depending on the Country Code (XPARA bit) when Service
Bit =OFF.
15) TEL N0.: Up to 20 digits are printed.
16) CALL BACK N0.: Up to 20 digits are printed.
17) FORWARDING N0.: Up to 32 digits are printed for OKIFAX4550 and up to 40 digits for
OKIOFFICE87.
18) SERVER TEL N0.: When FAX2NET FUNCTION is set to ON, up to 32 digits are printed for
OKIFAX4550 and up to 40 digits for OKIOFFICE87.
19) ACCOUNT N0.: Up to 14 digits are printed when FAX2NET FUNCTION is set to ON.
20) PREFIX N0.1 - N0.3: Up to 10 digits of prefix No. are printed when FAX2NET FUNCTION is
set to ON.
21) ISDN COUNTRY CODE: Up to 3 digits are printed when an ISDN board is mounted.
22) ISDN(G4) N0.: Up to 20 digits are printed when an ISDN board is mounted.
23) ISDN(G4) ID: Up to 10 digits are printed when an ISDN board is mounted.
24) ISDN SUB N0.: Up to 19 digits are printed when an ISDN board is mounted.
25) ISDN CALLED N0.: Up to 20 digits are printed when an ISDN board is mounted.
26) Dial parameters other than REDIAL TRIES, REDIAL INTERVAL, PBX LINE, AUTO START,
and DIAL PREFIX are left blank when an ISDN board is mounted and Service Bit = OFF.
27) 33: V.34 TX RETRY
"ON," "OFF" are printed.
28) 34: STYMBOL. RATE
"2400," "2800," "3200," and "3429" are printed.
29) 35: LEASED LINE
"ON," "OFF" are printed.
41309401TH Rev.4
33 /