Oki OKIFAX4550 Maintenance Manual page 76

T.F.
Item
No.
01 Service bit
02 Line monitor control
03 Country code
04 Time and date print
05 TSI print
41309401TH Rev.4
Table 2.2 (1/8) Service Personnel Initial Settings
Switching serviceman/user operation.
ON :
OFF : Service personnel's features are not avail-
To enable or disable the following functions:
• Drum (Total, Print, Scan), and toner counter clear
• Dial parameters
• etc
Changing the audible monitoring range.
FP +06 (To select the loudness of monitoring)
ON :
OFF : Disable
Note: In case of transmission mode, the moni-
Selecting the following country code:
USA, INT'L, GBR, IRL, NOR, SWE, FIN, DEN,
GER, HUN, TCH, POL, SUI, AUT, BEL, HOL,
FRE, POR, ESP, ITA, GRE, AUS, NZL, SIN,
HNG, LTA, MEX, CHN, RUS
Enables or disables the function of printing local
date and time at the top of the received page.
OFF/ONCE/ALL selectable.
OFF: Time and date are not printed
ONCE:Time and date are printed at the top of
ALL:
Note: Set at receiver.
Switches the function of printing TSI data from
remote fax onto the received pages. TSI is
printed at the leading edge of first reproduced
copy. (Set at receiver.)
When TF04 is set to "ALL", TSI is printed for the
all received pages.
ON :
OFF : Disable
(Reference)
TSI; Transmitting Subscriber Identification
Specifications
Service personnel's features are available.
able.
Enable
tor will be available during dialling, but the
monitor will be switched off automatically
after the elapse of specified time (about 5
sec.). However, when TF02 is set to ON,
the monitor is available during communi-
cation also.
the first page only.
Time and date are printed at the top of
every page.
Enable
Default
76 /