Oki OKIFAX4550 Maintenance Manual page 127

Note 1: RESOLUTION & ORIGINAL of Tx mode defult setting can be selected by using → key.
STD / NORMAL
EX. FINE / NORMAL
EX. FINE / DARK
2: When the service bit is set to "off" and the corresponding bit of XPARA of national code
is set to "off", Ring response and/or Distinctive ring is bypassesd as follows:
3: EXEC., A5 or A6 are used when MFP function is valid.
4: For G4 option, skip this step.
This step is valid when Service Bit = ON.
5: "FUNC. NOT AVAIL" is displayed for 3 seconds by pressing the No key if a MUPIS I/F
error occurs only when G4 option is mounted.
6: OKIOFFICE87 only.
7: USB CONV. MODE = ON only.
41309401TH Rev.4
STD / DARK
EX.FINE / LIGHT
(bypass)
11:RING RESPONSE
[ X ] YES(
(bypass)
12:DISTINCTIVE RING
[ X ] YES(
18:POWER SAVE MODE
[ X ] YES(
STD / LIGHT
FINE / LIGHT
PHOTO / NORMAL
PHOTO / LIGHT
← →
) NO( )
← →
) NO( )
← →
) NO( )
FINE / NORMAL
FINE / DARK
PHOTO / DARK
127 /