Oki OKIFAX4550 Maintenance Manual page 108

Table 2.7 (1/6) User's Initial Settings (One-touch key Program)
F+OT
Item
No.
1 Delayed transmission (TX)
2 Print from Message in Memory
(Print Memory MSG.)
Print from Confidential Reception
Message (Print Personal Box)
3 Confidential transmission
4 Relay broadcast initiate transmis-
sion
5 Polling transmission/reception
41309401TH Rev.4
Specifications
This function enters a message transmission time(s) and
location(s) for execution at a specified time. 5 specified times
can be registered (within 3 days.)
To print out the received messages from memory in "MSG.
IN MEMORY" mode, or when the machine has run out of
recording paper (including the door open and no toner state).
When received messages are in the memory. "MSM. IN
MEMORY" is indicated on the LCD. When printing in the
Memory Only Reception, an operator has to print the received
message by the Memory message printing operation.
To print out the confidential received messages in the memory
with 1-digit personal box number.
The maximum number of personal boxes is 8. Personal
boxes are numbered 1 to 8. When confidential received
messages are in the memory, "MESSAGE IN MEMORY" is
indicated on the LCD.
This function transmits a Confidential-marked message to
any one of 64 predesignated mailboxes provided in a distant
machines.
To program the mail box number 01 to 64.
Available remote station's mail box numbers:
OKIFAX 2400/2600:
OKIFAX 1000:
OKIFAX 2300/OF-18/OF-150:
OKIFAX 38/OF-27:
OKIFAX 2350/1050:
OKIFAX 2450:
OKIFAX 5200/5300:
OKIFAX 5500/5600:
OKIFAX 5700/5900:
OKIFAX 5750/5950:
OKIOFFICE84/OKIFAX 4500:
OKIFAX 4550/OKIOFFICE87:
OKIFAX 5400/5650:
This function automatically originates a message call via relay
key station (which must be equipped with OKIFAX 2600, OF-
38, OF-27, OKIFAX5950 or equivalent) up to 120 locations for
OKIFAX 2600 and 99 locations for OF-38 or OF-27.
To program relay password.
To enable or disable the relay report.
When auto dial code number 70
(OKIOFFICE87) is not assigned, relay broadcast report is not
transmitted. When it is assigned, relay report is transmitted
to fax number assigned to auto dial code 70, for OKIFAX4550
or to auto dial code 100 for OKIOFFICE87.
Polling TX: The documents placed on the feeder can be
collected by a remote station.
Bulletin polling: A kind of polling transmission. Bulletin poll-
ing enables polling transmission many times
until deleting the documents from one re-
mote station.
Polling RX: The fax can collect documents from one
remote station.
01 to 40
01 to 16
01 to 16
01 to 64
01 to 08
01 to 08
01 to 08
01 to 16
01 to 16
01 to 16
01 to 08
01 to 08
01 to 16
(OKIFAX4550)/100
108 /