Oki OKIFAX4550 Maintenance Manual page 111

Table 2.7 (4/6)
F+OT
Item
No.
2. Dial parameters
3. Clock adjustment
4. System data program
5. Personal box programming
6. Forwarding number program-
ming
41309401TH Rev.4
User's Initial Settings (One-touch key Program)
1. REDIAL TRIES
2. REDIAL INTERVAL
3. DIAL TONE DETECT
4. BUSY TONE DETECT
5. MF (TONE)/DP (PULSE)
6. PULSE DIAL RATE
7. PULSE MAKE RATIO
8. PULSE DIAL TYPE
9. MF(TONE) DURATION
10. PBX LINE
11. FLASH/EARTH/NORMAL
12. AUTO START
13. DIAL PREFIX
Refer to Table 2.6 and 2.2.1.9 for specification of dial
parameter settings.
Date and time adjustment.
Note: Data outside 1996 to 2095 cannot be registered.
(1) TSI/CSI (except for SUI and AUT)
Registration of TSI/CSI/CIG (numbers, + and space) in
20 digits.
TSI: Transmitting Subscriber Identification
CSI: Called Subscriber Identification
CIG: Calling Subscriber Identification
(2) SENDER ID
Registration of sender ID (alphabetic, numeric and sym-
bolic) in 32 digits.
(3) CALL BACK NO.
Registration of telephone number for call-back message
(alphabetic, numeric and symbolic) in 20 digits.
To allow the operator (in this case, a person who wishes to
assign a password to personal box) to assign a two functions
to 8 personal-box.
(a) Confidential RX
(b) Bulletin Polling TX
Used with confidential RX and Bulletin polling TX and Ad-
vanced T30 protocol. Personal box setting for Bulletin poll
using SEP frame and Confidential using SUB frame when
remote machine has a SEP/SUB capability.
The box No. 0 is used for only global Bulletin Polling TX.
Specify the destination of forwarding for incoming call.
Ahen the transfer destination telephone number is set,
forwarding can be specified.
The message is first received in the memory and when this
reception is completed, the fax automatically transfers the
message to one designated location.
1) Number of forwarding for incoming call destination that
can be specified.
OKIFAX 4550/OKIOFFICE87: 1
2) Number of characters used to specify a destination.
32 characters (numeral, -, P and Space) for OKIFAX4550
and 40 characters for OKIOFFICE87.
Specifications
111 /