Oki OKIFAX4550 Maintenance Manual page 219

Classification
Code
B901 Command response reception error
Bch layer 5
B902
Non-implicit command response received
B903 Lack of essential parameter
B904
Invalid parameter reception
B905
Invalid parameter value reception
B906 Window size over reception
B907
Document reference number error
B908 Length illegal
B909
Check point error
B90A Unallowable document
B801
Bch layer 6 Command response reception error
B802 Parameter reception error
B803
Negotiation unsuccessful RSSP reception
B804 Negotiation unsuccessful RSSN reception
B805
CSCC at the time when the transmission right cannot
be reversed
B806
CSA reception
B809 Error recovery time out
B80A
Time out at the time of termination
B80B
Close wait time out
B80C CSE reception before close
AE01
Bch layer 7 Negotiation unsuccessful (requirement for
communication with the other party FAX is not met)
AE02
Negotiation unsuccessful (only the other party standard)
AE03 The other party SUD fault
AE04
Basic terminal function unmatched
AE05 Switching type unmatched
AE06
The other party TU fault
If "redial" is applicable, the redial operation is entered depending on the number of redial times.
If the redial operation cannot be entered (i.e. the number of redial times is 0 or the residual
number of redial times is 0), Alarm=ON and Result=BUSY occur as with PSTN.
If "G3 fallback" is applicable, the dial operation in G3 mode is entered.
If a service code to which "G3 fallback" is applicable occurs regardless of dialing in G3 mode, a
communication error is assumed and Alarm=ON and Result=NG occur.
41309401TH Rev.4
Table 6.4 (3/3) G4 Service COde Lists
Description Alarm Result Remarks
ON NG
ON NG
ON NG
ON NG
ON NG
ON NG
ON NG
ON NG
ON NG
ON NG
ON NG
ON NG
ON NG
ON NG
ON NG
ON NG
ON NG
ON NG
ON NG
ON NG
ON NG
ON NG
ON NG
ON NG
ON NG
ON NG
219 /