Oki OKIFAX4550 Maintenance Manual page 18

No. Item
4 Effective reading width
Document width
ISO A4 (210 mm)
[INT'L/FTZ]
NA letter (216 mm)
[US/CANADA]
NA legal (216 mm)
[US/CANADA]
Note: Local copy: Printable reading width in local copy mode
5 Automatic document feeder (ADF)
6 Document skew
7 Document jam detection
8 Document jam removal
41309401TH Rev.4
Table 1.1 (2/11) Basic Performance Specifications
Communication
Mode/Paper width
G3/A4
G3/A4
G3/A4
Max. 20 documents for OKIFAX4550/OKIOFFICE87: NA
Letter or A4 (20-1b/75 gm)
Max. 15 documents:
NA Letter or A4 (16-28 lb/60-105 gm bond paper)
Documents shall be placed facedown on ADF stacker.
The first sheet will be fed first in the feeder and will exit
facedown in the document stacker.
Max. 1 mm skew over any advance of 100 mm. The
occurence of skew exceeding 1 mm per 100 mm shall be
0.5% or less.
1) Transmission will stop and line disconnection will occur
when the end of a document is not detected within 356
mm after scanning begins (except for the long document
scanning. TF + 10)
2) A jam will also be declared if the document does not
reach the scanning position within 10 seconds after the
start of a document feed.
Note: When a jam is detected during message transmis-
Manual release
Specifications
Effective reading
width
208 mm for TX
203.2 mm for local copy
(208 mm for local copy with
Horizontal Reduction = ON)
215 mm for TX
203.2 mm for local copy
(214 mm for local copy with
Horizontal Reduction = ON)
215 mm for TX
203.2 mm for local copy
(214 mm for local copy with
Horizontal Reduction = ON)
sion from the feeder, the machine will stop scanning
and disconnect the line, but its receiving capability
will remain valid.
Copy size
A4
Letter
Legal
18 /