Oki OKIFAX4550 Maintenance Manual page 164

j) Motor-S:
Remove the Motor-S by removing the
connector of motor and the two screws 1.
k) Photo-Sensor (PC1, PC2):
After disconnecting the two connec-
tors, remove the photo-coupler sen-
sors PC1 and PC2 on the Plate Scan-
ner B by pressing the latch using the
flat screwdriver or like.
(2) Reassembly procedure
Reverse the disassembly procedures.
41309401TH Rev.4
Plate Scanner B
Connector
Motor-S
Screw 1
PC2
PC1
164 /