Attendant Services - iPECS eMG80 Installation Manual

iPECS eMG80
System DECT Installation Guide
4. A
TTENDANT
The Attendant can manage User subscriptions to iPECS eMG80 DECT. The Attendant enables
subscriptions, can unsubscribe User data, request authentication and register a User to another
networked system. In addition, the Attendant can view and modify DECT-related codes
(Authentication and PARK). It is recommended these codes not be changed as subscribed
handsets may perform erratically. Subscription management and code control services are
available under the Attendant DECT Data program.
To access the DECT Data program from the Attendant station, perform the following procedure:
1. Press the [PGM] button.
2. Dial 0 and #.
3. Press the desired Flex button (1-9),

Flex Button 1 – Enter the station number for subscription => 4.1 Enable Subscription

Flex Button 2 – Enter the station number for un-subscription => 4.2 Terminate a

Flex Button 3 – Enter Authentication Code for Wireless terminal => 4.3 Authentication

Flex Button 4 – View the system ID (PARK Code) =>4.4 Viewing System ID (PARK

Flex Button 5 – Enter Authentication Code for Desk terminal => 4.5 Authenticating a

Flex Button 6 – Modify the system ID (PARK Code) => 4.6 Modifying the system ID

Flex Button 7 – Delete all subscriber data => 4.7 Deleting all subscriptions

Flex Button 8 – Delete each subscriber data => 4.8 Deleting a single subscription

Flex Button 9 – DECT zone Mobility => 4.9 Registering to Networked systems
S
ERVICES
STATION 100 (T)
04 SEP 01
WTU (UN) SUBSCRIBE
PRESS FLEX BUTTON
Subscription
Code for DECT subscription
code)
user
(PARK code)
02:49 PM
29
Issue 1.3