Using Isdn Supplementary Services; Activating Isdn Caller Id Restriction - iPECS LIP-8004D User Manual

LIP-8012D & LIP-8024D User Guide
To activate Keypad Facility operation:
• Press the
mode,
• Dial as desired.
To deactivate Keypad Facility operation:
• Press
• OR
• Press a Feature or Flex button.
While on an ISDN CO line, to access ISDN Supplementary
services:
• Press Flash,
• Press H
the desired feature.
To restrict Caller ID:
• Lift the handset,
• Press programmed CLIR/COLR button to place call.
KEYPAD FACILITY
KEYPAD FACILITY

9.2.2 Using ISDN Supplementary Services

ISDN service providers may incorporate features similar
to those of Centrex.
services are provided on a subscription basis, and as
with Centrex, are accessed using the
iPECS phone.
Using supplementary services an ISDN line can be
placed on Hold and a second call placed on the line.
You may then alternate between the two held calls
(Broker Call) using the hold button.
conference can be established using the Flash and Conf
Soft buttons. A conference can also be placed on hold.
, Conf, or CO line button to activate
/S
OLD AVE

9.2.3 Activating ISDN Caller ID Restriction

iPECS Phone users can restrict the transmission of
Caller ID to the far-end. This may be a subscription
service of your carrier.
required to activate outgoing, Connected Line (COL),
and incoming, Calling Line ID (CLID) restriction.
button to switch to keypad
,
These ISDN Supplementary
Separate Flex buttons are
54
Issue 1
button on an
Flash
An ISDN line
August, 2008