Using The Lcd & Speakerphone; Using The Lcd; 1000I Series Phone Displays - iPECS 1000i Series User Manual

1000i Series IP Phone (LME)
User Guide
2 Using the LCD & Speakerphone

Using the LCD

2.1
Each 1000i model has a different display. The top line of each display shows various icons as shown in the
Icons chart below.
The 1010i and 1020i have a 4-line display. The top section, which consists of a single line, displays the station
number, various icons and time.
The 1020i has flexible button page number. The middle section displays the label for each flexible button. The
fourth line displays the interactive softkey menu to guide you through feature access and User Program
selections. The display indicates the function for each softkey based on the status of your phone. In some
cases, there may be more than three available softkey functions. In this case, a right arrow displays on the
right side of the menu line. The right Navigation key scrolls to the next set of three functions, and the left key
moves to the previous menu choices.
The 1030i, 1040i and 1050i have a 5-line, 6-line and 8-line Liquid Crystal Display (LCD), respectively. The top
section, which consists of a single line, displays the station number, various icons, time and flexible button
page number. The middle section displays the label for each flexible button or a monthly calendar displays by
the OK key. This section of the display also provides the called or calling name or number display, feature
status, etc. The lower section, which consists of a single line, is the interactive menu of three softkeys
described in the previous paragraph.
The 1030i, 1040i and 1050i have a screen saver function. The screen saver has two kind modes, Clock or
LCD-Off. If not used, the screen saver will be activated after 10 minutes. This value or mode can be changed
on the web manager or LCD menu.

2.1.1 1000i Series Phone Displays

Below is a figure of Display layout of each 1000i phone.
1010i Phone Display
1020i Phone Display
16
Issue 1.2