LIP-8040E Gigabit Phone
To access Network Config. settings:
Press M
MG),
Enter the password (default=147*); the following will display:
Press the # key to toggle between multiple profiles (MFIM),
Press the VOL buttons to advance to the next network
configuration item,
Press the H
To configure 802.1x:
In Network Config. Menu, use VOL buttons to locate the 802.1x
configuration screen (shown),
Enable in 802.1x menu and press the Hold button.
Enter ID in 802.1x USER ID menu (It appears when 802.1x is
enabled.) and press the Hold button.
Enter Password in 802.1x PASSWORD menu (It appears when
802.1x is enabled.) and press the Hold button.
To set LLDP:
In Network Config. Menu, use
configuration screen (shown),
Enable in LLDP? menu and press the Hold/Save button.
2.2.4
Network Configuration
The User can review the current network configuration
or modify a new phone network configuration.
button and 4(iPECS-LIK)/2(iPECS SBG-1000, iPECS-
ENU
MFIM #[1/2] ?
MFIM #1 - CHANGE[#]
/S
button to save each setting.
OLD
AVE
802.1x ?
[ENABLED] – CHANGE[#]
LLDP?
[ENABLED] – CHANGE [#]
buttons to locate the LLDP
VOL
13
User Guide