Placing The Document On The Original Glass - Konica Minolta bizhub c350 User Manual

2

Placing the Document On the Original Glass

Place the document directly on the original glass for it to be scanned. Each page of
the document must be positioned manually (i.e., the previous one must be removed
and the next one placed on the original glass).
This method works best with books and other documents that cannot be fed
through the reverse automatic document feeder.
1
Lift open the original cover, or the reverse automatic document feeder if it is
installed.
Condition
When placing the document on the original glass, be sure to lift open the
original cover, or the reverse automatic document feeder if it is installed, 15°
or more.
If the document is placed on the original glass without lifting the original
cover or reverse automatic document feeder 15° or more, the correct
document size will not be detected.
2
Position the document face down onto the original glass.
❍ Load the document pages so that the top of the document is toward the rear
or the left side of the machine.
When loaded crosswise:
2-44
2.10 Feeding the Document
When loaded lengthwise:
C350