Center Console Side Panels Removal Removal - Concord; Removal; Installation Installation - Concord; Installation - Chrysler 2004 Concorde Service Manual
Hide thumbs
Also See for 2004 Concorde:
- Service manual (1649 pages) ,
- Owner's manual (273 pages) ,
- Service manual (3034 pages)
Table of Contents
Advertisement
LH
CENTER CONSOLE SIDE
PANELS
REMOVAL
REMOVAL - CONCORD
(1) Remove shift knob.
(2) Remove floor console shift bezel (Fig. 7).
(3) For right side panel , open the glove box door
and remove side panel screws
(4) For left side panel, remove steering column
cover and side panel screws.
(5) Disengage clips from floor console.
(6) Remove floor console side panel(s).
REMOVAL
(1) Remove shift knob.
(2) Remove console shift bezel (Fig. 8).
(3) To remove right side panel, open glove box and
remove side panel attaching screws.
(4) To remove left side panel, remove steering col-
umn cover and remove side panel attaching screws.
(5) Disengage clips from center console.
(6) Remove floor console side panel.
INSTALLATION
INSTALLATION - CONCORD
(1) Place front floor console side panel in position
on vehicle.
(2) Press on the side panel to seat clips.
(3) Install side panel(s) screws.
(4) Install floor console shift bezel.
(5) Install shift knob.
INSTALLATION
(1) Place front floor console side panel in position
on vehicle.
(2) Press on the side panel to seat clips.
(3) Install attaching screws.
(4) Install floor console shift bezel.
(5) Install shift knob.
DOOR SILL TRIM
REMOVAL
The door sills are attached with push pin fasten-
ers.
(1) Disengage fasteners attaching door sill trim to
sill panel (Fig. 13).
(2) Remove sill trim from vehicle.
Fig. 13 DOOR SILL TRIM
1 - FASTENERS
2 - DOOR SILL TRIM
3 - DOOR OPENING SILL
INSTALLATION
(1) Place sill trim in position on vehicle.
(2) Seat fasteners to attach door sill trim to sill
panel.
FLOOR CONSOLE
REMOVAL
(1) Remove shift knob.
(2) Remove floor console shift bezel.
(3) Remove side panels (Fig. 14), or (Fig. 15).
(4) Disconnect the electrical connectors.
(5) Remove fasteners attaching forward bracket to
instrument panel.
(6) Remove fasteners attaching bottom of console
storage bin to rear mounting bracket (Fig. 16).
(7) Remove floor console from vehicle.
INTERIOR 23 - 67
Advertisement
Chapters
Table of Contents
