Chrysler 2004 Concorde Service Manual page 1280

Hide thumbs Also See for 2004 Concorde:

Table of Contents

GEAR SHIFT CABLE - COLUMN (Continued)

(5) Tilt the column to the uppermost postion and

remove the tilt lever (Fig. 242).

Fig. 242 Tilt Lever Screw Removal/Install

1 - STEERING WHEEL

2 - TURN SIGNAL LEVER

3 - TILT LEVER

4 - SCREWDRIVER

(6) Remove the ignition key and remove lower col-

umn cover (Fig. 243).

Fig. 243 Lower Column Cover Removal/Installation

1 - LOWER COLUMN COVER

(7) Remove cable from shift pin (Fig. 244).

(8) Remove cable retainer clip from shift cable con-

duit bracket (Fig. 244).

CAUTION: Column must be tilted fully upward to

remove cable retainer clip.

(9) Raise hood. From inside the engine compart-

ment, remove the gear shift cable from the cable

bracket (Fig. 245).

Fig. 244 Column Gear Shift Cable

1 - CONDUIT BRACKET

2 - RETAINER CLIP

3 - GEARSHIFT CABLE

4 - SHIFT PIN

Fig. 245 Throttle/Gearshift Cable Bracket

1 - CABLE BRACKET

2 - GEARSHIFT CABLE

3 - THROTTLE CABLE

Chapters

Table of Contents