Chrysler 2004 Concorde Service Manual page 1300

Hide thumbs Also See for 2004 Concorde:

Table of Contents

INPUT CLUTCH ASSEMBLY (Continued)

(30) Tap reaction plate down to allow installation

of the reverse clutch snap ring. Install reverse clutch

snap ring (Fig. 317).

Fig. 317 Install Reverse Clutch Snap Ring

1 - REVERSE CLUTCH SNAP RING (SELECT)

2 - SCREWDRIVER

3 - REVERSE CLUTCH REACTION PLATE

(31) Pry up reverse reaction plate to seat against

snap ring (Fig. 318).

Fig. 318 Pry Up Reaction Plate

1 - SCREWDRIVER

2 - SNAP RING

3 - SCREWDRIVER

4 - MUST RAISE REVERSE REACTION PLATE TO RAISE SNAP

(32) Set up a dial indicator on the reverse clutch

pack as shown in (Fig. 319).

(33) Using moderate pressure, press down and

hold (near indicator) reverse clutch disc with screw-

driver or suitable tool and zero dial indicator (Fig.

320). When releasing pressure, indicator should

advance 0.005-0.010. as clutch pack relaxes.

Fig. 319 Measure Reverse Clutch Pack Clearance

1 - DIAL INDICATOR

2 - REVERSE CLUTCH

Fig. 320 Press Down on Reverse Clutch and Zero

1 - DIAL INDICATOR

2 - REVERSE CLUTCH

(34) Apply 30 psi (206 kPa) air pressure to the

reverse clutch hose on Tool 8391. Measure and record

reverse clutch pack measurement in four (4) places,

Chapters

Table of Contents