Chrysler 2004 Concorde Service Manual page 1464

23 - 94 SEATS
REAR SEAT BACK (Continued)
Fig. 38 40 Section Pivot Pin
1 - PIN
Fig. 39 REAR SEAT BACK 60 SECTION
1 - ATTACHING BOLT
(3) Install inboard nuts and outboard bolts attach-
ing rear seat back and belts to floor. Tighten to 40
N·m (29 ft. lbs.) torque.
(4) Install rear seat cushion (Refer to 23 - BODY/
SEATS/SEAT CUSHION - REAR - INSTALLATION).
INSTALLATION - 40 SECTION
(1) Place seat back 40 section on pin.
(2) Install bolt attaching 40 section seat back to
collar section. Tighten bolt to 16 N·m (12 ft. lbs.)
torque.
(3) Install seat back collar assembly (Refer to 23 -
BODY/SEATS/REAR
ASSEMBLY - INSTALLATION).
SEAT BACK - COLLAR
Fig. 40 REAR SEAT BACK COLLAR
1 - PIVOT BRACKET
INSTALLATION - 60 SECTION
(1) Install the 60 seat section on pivot bracket.
(2) Install bolt attaching 60 seat section. Tighten
bolt to 16 N·m (12 ft. lbs.) torque.
(3) Install the 40 seat section on pin.
(4) Install bolt attaching 40 seat section. Tighten
bolt to 16 N·m (12 ft. lbs.) torque.
(5) Install seat back collar assembly (Refer to 23 -
BODY/SEATS/REAR SEAT BACK COLLAR ASSEM-
BLY - INSTALLATION).
INSTALLATION - 60/40 SEAT COLLAR
ASSEMBLY
(1) Install the 60 seat section from the rear seat
back collar assembly.
(2) Install the 40 seat section from the rear seat
back collar assembly.
(3) Place the rear seat back collar assembly in
position in vehicle.
(4) Install nuts and bolts attaching rear seat back
collar assembly. Tighten nuts and bolts to 40 N·m (29
ft. lbs.) torque.
(5) Install the rear seat cushion (Refer to 23 -
BODY/SEATS/SEAT CUSHION REAR - INSTALLA-
TION).
LH