23 - 68
INTERIOR
FLOOR CONSOLE (Continued)
1 - INSTRUMENT PANEL
2 - FASTENERS
Fig. 15 FRONT FLOOR CONSOLE SIDE PANELS
1 - INSTRUMENT PANEL
2 - FLOOR CONSOLE BEZEL
3 - POWER OUTLET/CIGAR LIGHTER CONNECTORS
4 - TRANSMISSION RANGE INDICATOR ILLUMINATION
CONNECTORS
5 - REAR END CAP
6 - FLOOR CONSOLE
7 - FRONT FLOOR CONSOLE PANEL
Fig. 14 FRONT FLOOR CONSOLE SIDE PANELS - CONCORDE
3 - CLIPS
4 - SIDE PANEL
INSTALLATION
(1) If power tap wire harness was removed reat-
tach the harness with tape, along the indicated
markings.
(2) If previously removed, install the power outlet
tap. (Refer to 8 - ELECTRICAL/POWER DISTRIBU-
TION/CIGAR LIGHTER OUTLET - INSTALLA-
TION)
(3) Place center console in position on vehicle.
(4) Install fasteners attaching forward bracket to
instrument panel.
(5) Install fasteners attaching bottom of console
storage bin to rear mounting bracket.
(6) Connect the electrical connectors.
(7) Install side panels.
(8) Install center console shift bezel.
(9) Install shift knob.
LH