Cluster Bezel; Dash Silencer Removal; Installation - Chrysler 2004 Concorde Service Manual

LH
CLUSTER BEZEL (Continued)
(3) Install the items covering the bezel mounting
screws.
(4) Install the one screw (Concorde/300M) to clus-
ter bezel
To service any instrument cluster component, the
instrument cluster must be removed from the instru-
ment panel. Use the following procedure:
(5) Tilt the steering column down into the highest
position.
(6) Install the steering column shroud cover.
(7) Install the instrument panel left end cap.
(8) Connect the negative battery cable remote ter-
minal to the remote battery post (Fig. 1).
DASH SILENCER
REMOVAL
(1) Remove all parts mounting through the dash
silencer (Refer to 23 - BODY/INSTRUMENT PANEL/
INSTRUMENT PANEL ASSEMBLY - REMOVAL),
(Refer to 24 - HEATING & AIR CONDITIONING/
DISTRIBUTION/HVAC HOUSING - REMOVAL),
(Refer to 19 - STEERING/COLUMN - REMOVAL),
(Refer to 5 - BRAKES/HYDRAULIC/MECHANICAL/
PEDAL - REMOVAL), (Refer to 14 - FUEL SYSTEM/
FUEL INJECTION/ACCELERATOR
REMOVAL), (Refer to 23 - BODY/INTERIOR/CROSS
CAR BEAM - REMOVAL) and etc.
1 - PUSH PINS
2 - CLIPS
(2) Feed electrical wires back through the silencer
wiring pass through holes (Fig. 2).
(3) Remove fasteners attaching silencer to the
dash and side cowls.
(4) Remove silencer from vehicle.

INSTALLATION

(1) Position silencer to dash panel and cowl panels
(Fig. 2).
(2) Push retainers over previously installed studs
on the dash panel.
(3) Attach silencer with push pins to the side cowl
and clips to the top cowl/dash weld flange.
(4) Install all other parts removed (Refer to 23 -
BODY/INTERIOR/CROSS CAR BEAM - INSTALLA-
TION), (Refer to 14 - FUEL SYSTEM/FUEL INJEC-
TION/ACCELERATOR PEDAL - INSTALLATION),
(Refer to 5 - BRAKES/HYDRAULIC/MECHANICAL/
PEDAL - INSTALLATION), (Refer to 19 - STEER-
ING/COLUMN - INSTALLATION) (Refer to 24 -
HEATING & AIR CONDITIONING/DISTRIBUTION/
HVAC HOUSING - INSTALLATION), (Refer to 23 -
BODY/INSTRUMENT
PANEL ASSEMBLY - INSTALLATION) and etc.
PEDAL -
Fig. 2 DASH SILENCER
3 - DASH STUDS
4 - SILENCER
INSTRUMENT PANEL 23 - 45
PANEL/INSTRUMENT