Installation - Chrysler 2004 Concorde Service Manual

LH
OIL PAN (Continued)
1 - GASKET
2 - OIL PAN
3 - BOLT-M6
4 - NUT-M6

INSTALLATION

(1) Apply a 1/8 inch bead of Mopar Engine RTV
GEN II at the parting line of the oil pump housing
and the rear seal retainer (Fig. 106).
(2) Install oil pan gasket to the engine block.
(3) Install pan and attaching fasteners (Fig. 105).
(4) Install the structural collar (Fig. 104), using
the follow procedure:
(a) Install the vertical collar to oil pan bolts.
Pre-torque bolts to 1.1 N·m (10 in. lbs.).
(b) Install the horizontal collar to transmission
bolts and tighten to 55 N·m (40 ft. lbs.).
(c) Starting with center vertical bolts and work-
ing outward, final torque all bolts to 55 N·m (40 ft.
lbs.).
(5) Lower vehicle and install dipstick and tube.
(6) Fill engine crankcase with proper oil to correct
level.
(7) Connect negative cable.
Fig. 105 OIL PAN
5 - BOLT-M8
6 - BOLT-M8
7 - BOLT-M6
Fig. 106 OIL PAN SEALING
ENGINE 9 - 65