Chrysler 2004 Concorde Service Manual page 1578

Hide thumbs Also See for 2004 Concorde:

Table of Contents

A/C COMPRESSOR CLUTCH (Continued)

(8) Remove pulley retaining snap ring with Snap

Ring Pliers (C-4574), and slide pulley assembly off of

compressor (Fig. 3).

Fig. 1 COMPRESSOR SHAFT BOLT AND CLUTCH

1 - COMPRESSOR SHAFT BOLT

2 - COMPRESSOR CLUTCH PLATE

Fig. 2 CLUTCH PLATE AND SHIM(S)

1 - COMPRESSOR SHAFT

2 - CLUTCH PLATE

3 - CLUTCH PLATE SHIM

(9) Remove coil wire bracket/ground clip screw and

wire harness.

Fig. 3 REMOVING PULLEY SNAP RING

1 - SNAP RING

(10) Remove snap ring retaining field coil onto

compressor housing (Fig. 4). Slide field coil off of

compressor housing.

Fig. 4 CLUTCH COIL SNAP RING

1 - SNAP RING PLIERS

2 - CLUTCH COIL

3 - SNAP RING

4 - COMPRESSOR

Chapters

Table of Contents