Weighing Problems - Hasler IM-440 User Manual

DELTA2_US.book Page 184 Samedi, 5. avril 2008 3:50 15

Weighing Problems

11.3 Weighing Problems

The Weighing Device does not Weigh Properly
The Base does not seem to display a correct weigh.
You have to check the weighing device as follows.
Possible causes
The weighing device is not
selected.
There are vibrations or air
drafts in the weighing area.
Something is touching or
laying on the weighing device.
The weighing device zero is
not correct.
11
184
Actions
See the weighing type selection procedures in
Choosing a Weighing Type p.55.
Use a solid and steady table:
• Far from any door
Far from any fan.
•
Clear the weighing zone and rezero the weighing
device (see Weighing Settings p.133).
See the weighing device zeroing procedures in
Weighing Settings p.133