Imprint Memories; How To Create An Imprint Memory - Hasler IM-440 User Manual

DELTA2_US.book Page 144 Samedi, 5. avril 2008 3:50 15

Imprint Memories

8.10 Imprint Memories

The Imprint Memories allow to memorize imprint parameters for a standard stamp.
As user, you can use an Imprint Memory to restore all the parameters saved in this
Imprint Memory.
As supervisor, you can create, edit/modify or delete an Imprint Memory.
Each Imprint Memory is identified by a name and a number.
The system displays on the home screen the name of the current Imprint Memory .
Standard Stamp Imprint Memory
The table below gives the content of a [Standard] stamp imprint memory:
Imprint settings
8
Account setting
Managing Imprint Memories

How to Create an Imprint Memory

How to Create
an Imprint
Memory
144
Text
Date mode
Rate
Account number if any
To create an imprint memory:
1
As supervisor (see How to Log in as Supervisor p.124):
Press and type
> Predefined Imprint Management
2
Select a line named None in the list.
3
Press [OK] to create a new imprint memory.
4
Enter the name of the new imprint memory, then press [OK].
5
Enter the parameters, press [OK] to validate and display the
next list of parameters.
6
Repeat previous step until the system displays the name of
the new imprint memory in the list.
7
You can modify any parameter by using the > Edit/modify
function (see How to Edit / Modify an Imprint Memory p.146)
4
or select the path: