Safety Requirements - Hasler im-280 User Manual

Safety Requirements

1.2
1
Power Connection
Before connection, check whether the mailing system is suitable for external power
supply; refer to the type plates at the back of the pieces of equipment.
Use a wall plug located near the equipment and easily accessible. Do not route
•
the power cord between pieces of furniture or over sharp edges.
Make sure there is no strain on the power supply cord.
•
Avoid using outlets controlled by wall switches or shared by other equipment.
•
Compliance
Energy Star compliance
Your mailing system is Energy Star compliant: it helps you to save energy and money
while protecting the environment.
6
Safety Requirements
To reduce the risk of fire, use only the power cord supplied with
•
the mailing system.
Do not use this product on a wet floor or near water.
•
Your system should be connected with a 19vdc - 2.6A limited
•
power source.
In case of liquid spillage, disconnect the external power supply
•
from the wall plug and proceed to cleaning.