Checking The Connections - Yamaha XJR1300 2007 Service Manual

EAS20250

CHECKING THE CONNECTIONS

Check the leads, couplers, and connectors for
stains, rust, moisture, etc.
1. Disconnect:
Lead
G
Coupler
G
Connector
G
2. Check:
Lead
G
Coupler
G
Connector
G
Moisture → Dry with an air blower.
Rust/stains → Connect and disconnect sev-
eral times.
3. Check:
All connections
G
Loose connection → Connect properly.
NOTE:
If the pin "1" on the terminal is flattened, bend it
up.
4. Connect:
Lead
G
Coupler
G
Connector
G
NOTE:
Make sure all connections are tight.
5. Check:
Continuity
G
(with the pocket tester)
1
1-10
CHECKING THE CONNECTIONS
Pocket tester
90890-03112
Analog pocket tester
YU-03112-C
NOTE:
If there is no continuity, clean the terminals.
G
When checking the wire harness, perform
G
steps (1) to (3).
As a quick remedy, use a contact revitalizer
G
available at most part stores.