Yamaha XJR1300 2007 Service Manual page 299

The tail/brake light fails to come on.
1. Check the brake light switch.
Refer to
"CHECKING THE
SWITCHES" on page 7-81
OK↓
2. Check the entire signaling system's
wiring.
Refer to
"CIRCUIT DIAGRAM" on page
.
7-19
OK↓
Replace the tail/brake light assem-
bly (LED)
The turn signal light, turn signal indicator light or both fail to blink.
1. Check the flasher, flasher indicator
light bulb and socket.
Refer to
"CHECKING THE BULBS
AND BULB SOCKETS" on page 7-85
OK↓
2. Check the turn signal switch.
Refer to
"CHECKING THE
SWITCHES" on page 7-81
OK↓
3. Check the hazard switch.
Refer to
"CHECKING THE
SWITCHES" on page 7-81
OK↓
4. Check the turn signal relay.
Refer to
"CHECKING THE RELAYS"
.
on page 7-90
OK↓
5. Check the entire signaling system's
wiring.
Refer to
"CIRCUIT DIAGRAM" on page
.
7-19
OK↓
This circuit is OK.
NG→
.
NG→
NG→
.
NG→
.
NG→
.
NG→
NG→
7-22
SIGNALING SYSTEM
Replace the brake light switch
Properly connect or repair the signaling sys-
tem's wiring.
Replace the flasher, flasher indicator light
bulb, socket or both.
Replace the handlebar switch.
Replace the handlebar switch.
Replace the turn signal relay.
Properly connect or repair the signaling sys-
tem's wiring.