Yamaha XJR1300 2007 Service Manual page 65

1. Vacuum hose 1
2. Vacuum hose 2
3. Fuel hose 1
4. Fuel hose 2
5. Engine temperature sensor
6. ISC motor
7. Sub-throttle position sensor
8. Sub-throttle motor
9. Joint
10. Plug
11. Intake air pressure sensor
12. Clamp
13. Right throttle body side cover
14. Grommet
15. Breather assembly
16. Left throttle body side cover
17. Clamp
18. Air filter case
19. Clip
20. ISC hose
21. ISC motor
22. Throttle bodies
23. Intake manifold
A. Vacuum hose 1 should be routed under the
connector.
B. Fuel hose 1 should be routed over fuel hose 2.
C. Should be routed over right fuel rail collar.
D. Install vacuum hose 1 in this position.
E. To suction pressure sensor.
F. Install hose 1, 2 and 3 clamps from the left side
of the vehicle.
G. Install #4 hose clamp from the right side of the
vehicle.
H. After fitting the clamp in the breather assembly
and frame hole, leave the remainder along the
frame, without cutting.
2-42
CABLE ROUTING