Checking Of Connections - Yamaha YZF1000RJ Service Manual

•
•
•
•
•
•
•
CHECKING OF CONNECTIONS
I
ELEC
ID I
COLOR CODE
B .................... Black R ............................. Red
Br ................ Brown Sb ................... Sky blue
Ch .......... Chocolate Y ........................ Yellow
Dg ....... Dark green
B/L ............. Black/Blue
G .................. Green B/R .............. Black/Red
Gy .................. Gray B/Y ......... Black/Yellow
L ...................... Blue Br/L .......... Brown/Blue
0 ................ Orange G/R ............. Green/Red
EB801000
CHECKING OF CONNECTIONS
Check the connectors for stains, rust, mois-
ture, etc.
1.Disconnect:
• Connector
2.Check:
• Connector
Moisture ➔ Dry each terminal with an air
blower.
Stains/rust
➔
Connect and disconnect the
terminals several times.
3.Check:
• Connector leads
Looseness
➔
Bend up the pin (I) and con-
nect the terminals.
4.Connect:
• Connector terminals
NOTE: - - - - - - - - - - - -
The two terminals "click" together.
5.Check:
• Continuity (using a pocket tester)
NOTE: - - - - - - - - - - - -
• If there is no continuity, clean the termi-
nals.
• When checking the wire harness be sure
to perform steps 1 to 3.
• As a quick remedy, use a contact revital-
izer available at most part stores.
• Check the connector with a pocket tester
as shown.
G/W ........ Green/White R/W ............ Red/White
G/Y ....... Green/Yellow R/Y ............ Red/Yellow
L/B .............. Blue/Black W /B .......... White/Black
L/R ................ Blue/Red W /R ............ White/Red
L/W ............ Blue/White Y /B ......... Yellow/Black
L/Y ........... Blue/Yellow Y /L ........... Yellow/Blue
R/B .............. Red/Black
R/L ................ Red/Blue
8-3