Checking The Connections - Yamaha XVS250 2001 Service Manual

CHECKING THE CONNECTIONS

EB103000
CHECKING THE CONNECTIONS
Check the leads, couplers, and connectors for
stains, rust, moisture, etc.
1. Disconnect:
D lead
D coupler
D connector
2. Check:
D lead
D coupler
D connector
3. Check:
D all connections
NOTE:
If the pin 1 on the terminal is flattened, bend it
up.
4. Connect:
D lead
D coupler
D connector
NOTE:
Make sure that all connections are tight.
5. Check:
D continuity
NOTE:
D If there is no continuity, clean the terminals.
D When checking the wire harness, perform
steps (1) to (3).
D As a quick remedy, use a contact revitalizer
available at most part stores.
1-4
Moisture  Dry with an air blower.
Rust/stains  Connect and disconnect sev-
eral times.
Loose connection  Connect properly.
(with the pocket tester)
Pocket tester
90890-03112
GEN
INFO