Yamaha XJR1300 2007 Service Manual page 319

Fault code No. 13
Diagnostic code No.
Order Item/components and probable cause
When error code Nos. 13 and 14 are displayed simultaneously, first check
and repair No.13.
1 Connections.
Intake air pressure sensor 1 coupler
G
Wire harness ECU coupler
G
Sub-wire harness coupler
G
2 Open or short circuit in wire harness
and/or sub-wire harness.
3 Defective intake air pressure sensor 1.
Symptom Intake air pressure sensor 1 open or short circuit detected.
03 Intake air pressure sensor 1
FUEL INJECTION SYSTEM
Check or maintenance job
Check the coupler for any pins
G
that may have pulled out.
Check the locking condition of
G
the coupler.
If there is a malfunction, repair
G
it and connect it securely.
Repair or replace if there is an
G
open or short circuit.
Between intake air pressure
G
sensor coupler and ECU cou-
pler.
(Black/Blue–Black/Blue)
(Pink/White–Pink/White)
(Blue–Blue)
Execute the diagnostic mode.
G
(Code No.03)
Replace if defective.
G
Refer to "CHECKING INTAKE
AIR PRESSURE SENSORS 1
AND 2" on page 7-98.
7-42
Reinstatement
method
Set the main
switch to "ON".