Electrical System - Yamaha XJR1300 2007 Service Manual

EAS21750

ELECTRICAL SYSTEM

EAS21760
CHECKING AND CHARGING THE BATTERY
Refer to "ELECTRICAL COMPONENTS" on
page 7-79.
EAS21770
CHECKING THE FUSES
Refer to "ELECTRICAL COMPONENTS" on
page 7-79.
EAS21780
REPLACING THE HEADLIGHT BULB
1. Disconnect:
Headlight unit "1"
G
2. Remove:
Headlight bulb holder cover "1"
G
Ground lead "2"
G
Headlight cover "3"
G
3. Remove:
Headlight bulb holder "1"
G
Headlight bulb "2"
G
EWA13320
WARNING
Since the headlight bulb gets extremely hot,
keep flammable products and your hands
away from the bulb until it has cooled down.
4. Install:
G
ECA13690
CAUTION:
Avoid touching the glass part of the head-
light bulb to keep it free from oil, otherwise
the transparency of the glass, the life of the
1
bulb and the luminous flux will be adversely
affected. If the headlight bulb gets soiled,
thoroughly clean it with a cloth moistened
with alcohol or lacquer thinner.
5. Install:
G
G
G
G
G
EAS21800
ADJUSTING THE HEADLIGHT BEAM
1. Adjust:
2
G
MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM
1
a. Turn the adjusting screw "1" in direction "a" or
3
Direction "a"
Headlight beam is raised.
Direction "b"
Headlight beam is lowered.
3-33
ELECTRICAL SYSTEM
2
Headlight bulb
New
Secure the new headlight bulb with the head-
light bulb holder.
Headlight bulb holder
Headlight coupler
Ground lead
Headlight bulb holder cover
Headlight unit
Headlight beam (vertically)
"b".
b
1
a
1