Yamaha XJR1300 2007 Service Manual page 300

The neutral indicator light fails to come on.
1. Check the neutral indicator light bulb
and socket.
Refer to
"CHECKING THE BULBS
AND BULB SOCKETS" on page 7-85
OK↓
2. Check the neutral switch.
Refer to
"CHECKING THE
SWITCHES" on page 7-81
OK↓
3. Check the diode.
Refer to
"CHECKING THE DIODE" on
.
page 7-91
OK↓
4. Check the entire signaling system's
wiring.
Refer to
"CIRCUIT DIAGRAM" on page
.
7-19
OK↓
This circuit is OK.
The oil level warning light fails to come on.
1. Checking the oil level warning light
bulb and socket.
Refer to
"CHECKING THE BULBS
AND BULB SOCKETS" on page 7-85
OK↓
2. Check the oil level switch.
Refer to
"CHECKING THE
SWITCHES" on page 7-81
OK↓
3. Check the entire signaling system's
wiring.
Refer to
"CIRCUIT DIAGRAM" on page
.
7-19
OK↓
This circuit is OK.
NG→
.
NG→
.
NG→
NG→
NG→
.
NG→
.
NG→
7-23
SIGNALING SYSTEM
Replace the neutral indicator light bulb, socket
or both.
Replace the neutral switch.
Replace the relay unit (diode)
Properly connect or repair the signaling sys-
tem's wiring.
Replace the oil level warning light bulb, socket
or both.
Replace the oil level switch.
Properly connect or repair the signaling sys-
tem's wiring.