Machine Setting; Auto Panel Reset; Preheat Mode; Energy Save Mode - Konica Minolta bizhub c20 Service Manual

Field Service Ver. 1.0 Sep. 2008

11.2 MACHINE SETTING

11.2.1

AUTO PANEL RESET

• Sets the period of time after which the initial screen reappears after the last print job is
Function
received or the last panel key is operated.
Use • To set the period of time by executing auto panel reset.
• The default setting is 1min.
Setting/
procedure
OFF
11.2.2

PREHEAT MODE

Function
• To specify the time until the machine enters preheat mode after a copy cycle has been
completed or after the last key operation.
Use
• The default setting is 15 min.
Setting/
procedure
1 to 120 min
11.2.3

ENERGY SAVE MODE

Function
• To specify the time until the machine enters energy save mode after a copy cycle has
been completed or after the last key operation.
Use
• The default setting is 30 min.
6 to 120 min
Setting/
procedure
NOTE
• Valid only when [ENERGY SAVE MODE] of FAX MAINTENANCE or [ENERGY SAVE
MODE] of SERVICE MODE is set to [ON]
11.2.4

LCD CONTRAST

Function • Sets the brightness of the LCD display.
Use • To set the brightness of the LCD display.
• The default setting is
Setting/
procedure
11.2.5

KEY SPEED

A. TIME TO START
Function
• To specify the length of time until the cursor begins to move continuously when a key is
held down.
Use
• The default setting is 1.0sec.
Setting/
0.1sec
procedure
2.5sec
30sec "1min" 2min
.
LIGHT -1 "0"
0.3sec 0.5sec
3.0sec
11. UTILITY mode
3min 4min
+1 +2 DARK
"1.0sec" 1.5sec
5min
2.0sec
131