Konica Minolta bizhub c20 Service Manual page 127

7. Other
[1]
[3]
[1]
[4]
[2]
[1]
82
[2]
A0FDF2C042DA
[2]
A00FF2C506DA
[3]
A00FF2C053DA
Field Service Ver. 1.0 Sep. 2008
5. Remove the gasket [1] that secures
the shoulder screw in position.
6. Fix the PH unit [3] with three shoul-
der screws [2].
7. Reinstall the gasket [1] and fasten
the aluminum part with tape [2].
NOTE
• Make sure that the gasket [1] is
pushed against the shoulder screw.
• Tape must be located on the upper
side of the dotted line as shown in
the illustration.
8. Attach the four imaging unit rails [2]
with one screw [1] for each rail.
NOTE
• Make sure that the convex parts [3]
at rear end of the rail are fit in the
locating hole [4] on the main body.