11. UTILITY mode
11.10.6
DENSITY LEVEL
Function
• Select the scan data density that is used as a default.
Use
• The default setting is
Setting/
procedure
LIGHT
11.11 DIRECT PRINT
NOTE
• When [ADMIN.MANAGEMENT] - [CAMERA DIRECT] is set "DISABLE" this menu is
not displayed.
11.11.1
IMAGE QUALITY
Function
• Sets the output resolution for camera direct photo printing.
Use
• To change the output resolution for camera direct photo printing.
• The default setting is NORMAL.
Setting/
procedure
"NORMAL"
11.11.2
PAPER SIZE
Function
• Sets the paper size for camera direct photo printing.
• To change the paper size for camera direct photo printing.
Use
• The default setting varies according to the voltage of the printer.
<TRAY1 PAPER>
"PLAIN PAPER" / THICK PAPER / THICK PAPER2 / LABELS / POSTCARD / GLOSSY /
GLOSSY2
• When a setting other than [POSTCARD] is selected:
"LETTER" / "A4" / A5 / STATEMENT / B5
• When [POSTCARD] is selected:
Setting/
"LETTER" / "A4" / A5 / STATEMENT / B5 / J-POSTCARD 100X148
procedure
• When [GLOSSY] or [GLOSSY2] is selected:
"LETTER" / "A4" / A5 / STATEMENT / B5 / PHOTO SIZE 10X15 / LTR 2UP SPL
/ A4 4UP SPL / A4 2UP SPL
<TRAY2 PAPER>
• The default setting is A4 or LETTER.
"A4" / "LETTER"
11.11.3
N-UP LAYOUT
Function
• Sets the number of images printed on one page for camera direct photo printing.
• To specify the number of camera direct photo printing images to be printed on each
Use
sheet.
Setting/
• The default setting is 1.
procedure
"1" / 2 / 3 / 4 / 6 / 8
164
.
-2
-1
"0"
FINE
Field Service Ver. 1.0 Sep. 2008
+1
+2
DARK