Field Service Ver. 1.0 Sep. 2008
14.3.10
TONER EMPTY REPORT
Function
• Select to generate a report to a specific destination when toner empty status occurs in
the engine.
Use
• The default setting is OFF.
ON:
"OFF": Not to generate report.
• If "ON" is selected, select generate report and send to remote side when toner runs out.
Setting/
• Enter the telephone number for which the report is to be produced.
procedure
• Fax number specifications: An up-to-20-digit number that may consist of [0-9], [*], [#],
[pause], and [space]. (0-9, #, *, pause, _)
• The report will generate after 20 minutes, 24 hours, 48 hours, or 72 hours after the event
has occurred or until the condition is gone.
A. Toner empty report (example)
NAME:ABC 123
TEL:1234567
DATE: Jun 10.2008 15:12
The Fax's following conditions were appears, the machine may be can not work correctly, the Fax
already send a report to your dealer automatically. They will contact with you soon.
Toner Cartridge Cyan
Toner Cartridge Magenta : Full
Toner Cartridge Yellow
Toner Cartridge Black
14.3.11
PROTOCOL REPORT
Function
• Print communication report.
• Choose one from among the following.
Use
• The default setting is OFF.
Setting/
"OFF":
procedure
ON:
ON (ERROR): Print T.30 communication report when an error occurs.
14.3.12
TWAIN TIMEOUT
Function
• To specify the time for TWAIN time out.
Use
• The default setting is 6 min.
Setting/
2min
procedure
12min
Generate a report to report destination.
SERVICE REPORT
: Empty
: Full
: Full
Disable T.30 communication report.
Print T.30 communication report.
4min
"6min"
14min
16min
14. SERVICE MODE
A0FDF3C500DA
8min
10min
18min
197