Field Service Ver. 1.0 Sep. 2008
18.3.41
C053: Compact flash full error
MFP board/2 (MFPB/2)
Step
1
Reboot the main body.
Delete the job hold in [PS/PCL PRINT] -
2
[PROOF/PRINT MENU] to increase the
available range for user space.
Check the compact flash for proper con-
3
nection and correct as necessary.
Format HDD with [SYS DEFAULT MENU] -
4
[CARD FORMAT].
5
Change compact flash.
6
Change MFPB/2.
18.3.42
C060: Firmware update error
MFP board/2 (MFPB/2)
Step
1
Reboot the main body.
Check the cable that has been used for
2
update of the firmware for proper connec-
tion and correct as necessary.
Check the firmware update file and if the
3
file is not the correct one, update the firm-
ware again.
Check the firmware update procedure and
4
if the procedure is not correct, update the
firmware again.
5
Update the firmware again.
Check the MFPB/1 connector for proper
6
connection and correct as necessary.
7
Change MFPB/2.
Relevant electrical parts
Action
Relevant electrical parts
Action
Compact flash card
WIRING DIAGRAM
Control signal
⎯
⎯
⎯
⎯
⎯
⎯
WIRING DIAGRAM
Control signal
⎯
⎯
⎯
⎯
⎯
⎯
⎯
18. Malfunction code
Location (electri-
cal component)
⎯
⎯
⎯
⎯
⎯
⎯
Location (electri-
cal component)
⎯
⎯
⎯
⎯
⎯
⎯
⎯
349