Konica Minolta bizhub c20 Service Manual page 472

Field Service Ver. 1.0 Sep. 2008
Maintenance
2. Periodic check
2.1 Maintenance procedure (periodic parts check)
2.1.1 Replacing the feed roller
A. Periodically replaced parts/cycle
• Feed roller: Every 300,000 prints
B. Procedure
1. Slide out tray 1.
2. Lock the media lift plate.
[2] [3]
[1]
[1]
A00TF2C001DA
[2]
A00TF2C002DA
3. Remove two C-rings [1] and remove
the washer [2], and the bearing [3] at
the front.
4. Remove the C-ring [1], and remove
the feed roller [2].
2. Periodic check
3