Field Service Ver. 1.0 Sep. 2008
J. SMTP AUTH.
(1) DISABLE/ENABLE
Function
• If [ENABLE] is selected, SMTP Authentication is enabled.
Use
• The default setting is ENABLE.
Setting/
procedure
(2) SMTP USER NAME
Function
• Type in the user name used for authentication with SMTP Authentication.
Use
Setting/
• The default setting is Blank.
procedure
• Up to 63 characters can be entered for the SMTP user name.
(3) SMTP PASSWORD
Function
• Type in the password used for authentication with SMTP Authentication.
Use
Setting/
• The default setting is Blank.
procedure
• Up to 15 characters can be entered for the password.
11.4.5
LDAP SETTING
A. DISABLE/ENABLE
Function
• This function is used to set whether or not to use LDAP.
Use
• The default setting is ENABLE.
Setting/
procedure
B. LDAP SERVER ADDR.
Function
• To set the LDAP server address.
Use
• To enter LDAP server address.
• The default setting is 0.0.0.0.
Setting/
1. Select the [LDAP SERVER ADDR.], then press Select key.
procedure
2. Type in the IP address or host name for the LDAP server, then press Select key.
• The host name can contain a maximum of 64 characters.
C. LDAP PORT NO.
Function
• To set the LDAP server port number.
Use
• To enter the LDAP server port number.
• When SSL Setting is disable, the default value is 389.
• When SSL Setting is enable, the default value is 636.
Setting/
procedure
1. Select the [LDAP PORT NO.], then press Select key.
2. Type in the port number (1 - 65535), then press Select key.
DISABLE
DISABLE
11. UTILITY mode
"ENABLE"
"ENABLE"
145