Konica Minolta bizhub c20 Service Manual page 185

11. UTILITY mode
(2) BIDIRECTIONAL
Function • Select whether or not to enable raw port bidirectional communication.
• If [ENABLE] is selected, raw port bidirectional communication is enabled.
Use
• If [DISABLE] is selected, raw port bidirectional communication is disabled.
• The default setting is DISABLE.
Setting/
procedure
O. SLP
Function • Select whether or not to enable SLP.
• If [ENABLE] is selected, SLP is enabled.
Use
• If [DISABLE] is selected, SLP is disabled.
• The default setting is ENABLE.
Setting/
procedure
P. SNMP
Function • Select whether or not to enable SNMP.
• If [ENABLE] is selected, SNMP is enabled.
Use
• If [DISABLE] is selected, SNMP is disabled.
• The default setting is ENABLE.
Setting/
procedure
Q. WSD PRINT
Function • Select whether or not to enable WSD printing.
• If [ENABLE] is selected, WSD printing is enabled.
Use
• If [DISABLE] is selected, WSD printing is disabled.
• The default setting is ENABLE.
Setting/
procedure
R. IPSEC
Function • Select whether or not to enable IPsec.
• If [ENABLE] is selected, IPsec is enabled.
Use
• If [DISABLE] is selected, IPsec is disabled.
• The default setting is DISABLE.
Setting/
procedure
S. IP ADDR. FILTER
(1) ACCESS PER.
Function • Specify access permissions for IP address filtering.
• If [ENABLE] is selected, access permissions is enabled.
Use
• If [DISABLE] is selected, access permissions is disabled.
• The default setting is DISABLE.
Setting/
procedure
140
"DISABLE"
DISABLE
DISABLE
DISABLE
"DISABLE"
"DISABLE"
Field Service Ver. 1.0 Sep. 2008
ENABLE
"ENABLE"
"ENABLE"
"ENABLE"
ENABLE
ENABLE